SWIM N SPA LEAK N' SEAL (1 PT.)

Swim N Spa Leak n' Seal is recommended for the repair of minor leaks and

cracks in pools and spas. Usually stops leaks in 24 hours.DIRECTIONS FOR USE

1. Turn pump off. REMOVE cartridge or filter grids to avoid
product from passing through the filtration system.
2. If the leak location is unknown, add the recommended dosage
to the skimmer. If you are sure of the location of the leak, pour
the recommended dosage directly into the water at the area of
the leak.
3. After 30 minutes following application, turn pump on and allow
to run for at least 8 hours.
4. Check pool or spa to see if it is still losing water. A second
application may be necessary and can be made within the next
24 hours.
5. Replace filter grids or cartridges after 24 hours and resume
normal filtration. Pool or spa may be entered 24 hours after
application.

DOSAGE AMOUNT

IMPORTANT NOTES:
• Remove cartridge or filter grids to avoid product from passing
through filtration system.
• It is possible that fine fountain jets may block when this product
is applied.

Note: Spa Sauna Direct only ships pool and spa chemicals within the continental United States.